How to contact us

First of all, thank you for entering our blog and trying to solve your ink and toner cartridges with our help. Unfortunately, we’re lacking a direct contact form to help you solve any specific problem.

We’re very grateful you want to contact us, and thank you so much for trusting the information we’ve shared here.

The only way you can contact us at the moment is by posting comments on our posts: we read them on a daily basis and are happy to answer back. We’ve also found this is the most effective method for finding a solution to any problem, since it remains on this blog. Other readers may be inspired by the results and created a more effective solution.
This is the proper way of writing a comment on our blog posts.

coment in en.rellenadodecartuchos

Things to keep in mind:

You must post your comments using a valid and verified profile or email account, as Blogger demands. In this way, you can receive a direct notification when your question has been answered. If you post an anonymous question, you won’t be able to receive one, so we recommend you follow Blogger’s instructions and use a valid account such as LiveJournal, Blogger, Wordpress and TypePAD.

Another way of being notified is by subscribing to the posts. Take into account you will get an email or profile notification each time a question or comment is added to the post you’re subscribed to. We suggest you choose this method until your question has been answered.

Subscribing to posts:

This is a very effective way of getting an answer from the editor of the post. We answer each and every comment because we think they’re more important than publishing a new entry on our blog, since they give us feedback from our readers and customers. In this way, we obtain more information can look for new solutions.

Restore your Hp Deskjet F4480 printer with HP 60 ink cartridges

Learn how to restore your HP Deskjet F4480 printer by following our quick three-step tutorial.

This post will deal with restoring the HP Deskjet F4480 printer, which stopped recognizing the ink cartridges from the moment they were refilled. Also, both the On/Off and the ink cartridge indicators have been blinking for a while. This process will take a bit of patience and a few blank sheets in the paper tray.

You may also be interested in learning how to align your HP 60 ink cartridges inside the printer. Click on the previous link to perform this alignment, which is completely up to you.

Now the actual restoring process for the HP Deskjet F44480 printer can start.

Step 1.

Turn the printer and wait for it to be fully functional: it must finish cleaning the ink cartridges and setting them in place. The LED indicators will, of course, continue to blink.

Step 2.

Press the On/Off down and, without letting it go, press the Cancel button, which can be found a little bit down the road from the first one: a red button with a cross drawn on it.

You must keep going for about 30 seconds, since we’re restoring the printer back to its original factory settings. This will occur after this entire process is finished.

Note: The printer will print a test sheet using it’s proper system, so you won’t need to connect the printer back to the computer for this particular case.

Step 3.

Now we can print a document directly from our computer; keep in mind the former buttons will still blink. However, the ink cartridge indicator will stop doing it, and they will print perfectly.

In case none of these procedures work out as you expected them to, you can take a look at our post created to restore HP 60 Black and Tricolor ink cartridges using duct tape.

Please keep in mind this post is based on our own experience at our printer repair workshop. If you happen to have another solution for this problem, we suggest you post it in a comment or send it to us so we can publish it on this blog.

How to reset the 122 HP® cartridges

I hope to solve your problem without giving you the solution "But it is the reality"

Unfortunately this case cannot be solved because these cartridges are not very strong, it is an ongoing problem which occurs when this cartridge is refilled.

ink cartridge hp black and tricolor

We always recommend refilling these cartridges using the following procedure.

• How to refill ink hp 122 black cartridges
• How to refill hp 122 tricolor ink cartridges  

So much so that the creators of these cartridges Hewlett-Packard have discontinued the cartridge 122 without completing the continuation of their printers.

You may be interested in the following links:

• The real secret of the HP 122 cartridges

HP Deskjet 1000 printer says that the cartridge is jammed

1. Disconnect and install the printer again.
2. Turn off the printer by pressing the power button for about 10 seconds and turn it on again.
3. Disconnect all of the printer from any USB’s and the electricity and connect it again.

There is another option which provides service and the HP page for your users to click on for more info to see the official release of the product.

car HP jam

Problem

The message "Support the jammed cartridges / clear the jam and press OK" in the control panel. The product can also have one of the following problems:

• A paper jam
• The product does not print
• Printing stopped unexpectedly

How to use the solutions in this document

A carriage jam can occur for several reasons, such as obstructions in the carriage path, a paper jam, or even issues with the product software.

To solve the carriage jam, try each solution in this document, and then use the steps in this section to print a self-test page and determine if the product hardware functions correctly.

Once you have solved the carriage jam and the product prints a self-test report correctly, there is no need to continue troubleshooting the problem.