How to change the toner cartridge on samsung laser monochrome printers

The amount of time a toner cartridge can be used on our computers depends entirely on what you print with it. Once a toner cartridge is empty, you will either need to refill it or buy a new one, so you must know how to remove and install toner cartridges.

In this post, we’ll try to explain how to remove and place a toner cartridge on samsung laser monochrome printers in the easiest way possible.

You must keep in mind that, even if toner cartridges are programmed to print a certain amount of pages, this will depend on how dense the pages are. For example, if you make the toner print several images, its lifespan won’t be as long and you will need to change it soon. The toner cartridge could even print a smaller amount of pages than the one it says it yields.

A bulb will always go off on laser printers when the toner cartridge has ran out. The most convenient things to do is to change it entirely. If you continue to use the cartridge after this bulb starts blinking, you could make your printer suffer.

In order to replace a toner cartridge, we recommend you work with extra precaution since the edges of the cartridge and the product itself could be at a temperature that damages our skin. As you may already know, the printing process where the toner or dust are set on paper is caused by heat, which can make the temperature of your printer rise and, like we mentioned earlier, harm your skin. We recommend you stick to the following procedure all the time.

Procedure for changing the toner cartridge in a samsung laser monochrome printer:

Step #1:

First, disconnect your printer. This will keep any electrical feed from reaching your body, so we recommend you disconnect the printer’s power cable. We also suggest you let the printer rest for about 2 minutes before plugging the power cable back into it.

disconnect the power cable

Step #2:
You will now need to to touch the frontal gate where you can reach the toner cartridge from. Normally, you could access this area by pulling on the cover in front of us. Please take a look at the following picture.

open the front gate that will let you access the toner cartridge

Step #3:
Then, extract the brand new toner cartridge from it’s packaging, and remove the protective paper from the cylinder. The cylinder is the green part of the toner, which you must avoid touching with your own hands, since this can end up staining your paper sheets.

Remember to pull on the toner’s ribbon. This is a very important steps, since all toner cartridges have this ribbon which you must remove. If you leave it on the cartridge, your pages will have blurry stains on the sides. You must remove it entirely to keep it from tearing inside the toner cartridge. If you need any help with this, contact us and post a comment in the section below this post.

this is how you should remove the ribbon from your toner cartridge

Step #4:
Shake the toner up before putting it inside the printer; this is necessary, but it’s not really mandatory. Doing this will help the toner dust spread inside the cartridge, and it will also contribute to making it adhere to the magnetic roller for proper printing. Please take a look at the following picture.

shake the toner cartridge before putting it inside

What to do if you get a bit of toner dust on your clothes or skin?

First of all, let me assure you there is nothing wrong with this, that it’s perfectly normal and that you only need to put some water on the place it landed on to keep it from sticking to it. If it landed on a piece of clothing, wash it with cold water, since hot water will make the toner dust set even more into the fabric.

Please keep the toner dust away from sunlight, since this can damage the toner cylinder or the photoconductor. Now please take a look at the next picture.

Step #5:
Put the toner cartridge on the slots located inside the printer, which is exactly where the toner cartridge should fit into. Now place the cartridge and start using it. If you have any problems with it, contact us through a comment in the section below this post.

Step #6:
Close the frontal gate where the toner goes and print at est sheets using this cartridge.

How to reset toner on Brother MFC 7820N printers

This post will teach you how to restore your Brother MFC 7820N printers with an easy, three-step tutorial you can follow anywhere.

This time, we’ll be dealing with restoring a Brother MFC 7820N printer/copier. The printer we’re talking about is shown in the picture ahead, just in case this is exactly the same one you’re having problems with.

Solution to the problem:

Toner end of life

end life toner

When we refill our printer’s toner, we save a ton of money in comparison to the amount we’d spend buying a brand new one. However, this doesn’t work all the time, since not all companies use the same system for their toners.

Some printers, as you may already know, insert chips that can keep count of the amount of pages printed with the original toner, so it stops printing at all once the powder runs out. Errors will start appearing constantly when printing.

This is the story, now we’ll show you the solution.

If you wish to restore your Brother MFC 7820N printer/copier but no longer get the Toner End of Life error message, follow the next instructions:

1. Open the frontal lid on your MFC 7820N, the gate that will allow you to remove the toner and the drum do not remove the cylinder/toner from the device. 
2. Press the Options menu down. You will find it on the left side of the printer/copier’s control panel.
3. Type *00 in the keyboard.

The Brother MFC 7820N counter must go back to zero (0) and the Toner End of Life message must stop appearing after this.

Warning: This may void the printer’s warranty, and could certainly damage the device if you choose to refill or even use your toner cartridge again. I image you already know this. We hope this post was of help for you.

Note: The information contained in this post has actually worked out for us, but it’s obviously not the only way of solving this problem. If you happen to know of any other fix, please comment it or send it as a troubleshooting message.

How to disarm toner HP 05A (CE505A)

Here is the toner , it is a good toner since it renders approximately 2,000 pages after completed , this toner has some factors that are a little tough at the time of filling so it is not recommended to refill it if you do not have the necessary tools and knowledge.

But actually the most difficult part is removing the 05a Hp pins from the toners which is shown in this post and created for people looking for solutions to problems with your cartridges, toners or printers.

HP 05a in box

The most professional manner

What is known so far is what is shown in these pictures since it has been implemented and has given good results when customer come to your home and must print with your printer, which likewise is very good, as I was saying just take your cartridges to the table and have the tools to perform these processes , there is also a video is in Portuguese but it is easy to understand a supplier of toners that indicates how to make the work easier.

Video on how to open your toner

"The process of removing toner pins must be done as shown in these photographs and video"

step No. 1

step No. 2

There are other ways to complete this process which could be very difficult for the toner because as seen in the following images it destroys key parts of the operation of this equipment.

toner cartridge open

How to reset the copier toner for the Brother MFC-7840W

Very dear readers, now let’s learn how to reset the error introduced in the toner in this copier’s model, the message that usually appears when the toner is refilled is that the lifespan has expired in other words that this toner since it has to be changed in English "Toner Life End" is simple to solve this problem:

Here are the steps:

1. Lift the lid and the front cover and leave it open
2. Press Clear/Back in English Clear / Back Replace drum appears "Replace Drum?" appears on the screen.
3. Press "* 00" asterisk and zero, it will be read and accept the low toner error (End of life toner) should disappear.
4. Close everything and it’s ready.

Printer Brother MFC-7840W

If you have any questions please post a comment.