How to refill the HP 93 tricolor ink cartridge

This ink cartridge corresponds to the vivera ink generation, which was very popular in Latin America. These cartridges in particular were made for domestic and small and medium-business use, which refers to how often they should be used. Normally, these cartridges yield up to 220 pages.

After refilling them, the page yield can go down to 150 sheets, which is still a large sum if you choose to keep this ink cartridge and to invest just a little bit of time on this operation. Every color in these ink cartridges, such as yellow, cyan and magenta, must be refilled with 5ml of ink.

You must be very careful and not let yourself be led astray by the instructions printed on the cartridge’s label. The color combination on it is not the proper one. The following picture will show you the proper color placement for this procedure.

This ink cartridge is compatible with the following HP printer models: c3180; c4180; 7850; 5420v; 5440; 5440xI; 5442; 5443; d4160; 1507; 1510; 1510v; 1510xI; 6310; and 5420v. If you have any problems while refilling this ink cartridge, contact us by posting a comment in the section below this post.

Procedure to refill the HP 93 tricolor ink cartridge:

Before you start to refill an ink cartridge, we recommend you work somewhere you can clean easily afterwards, whether it’s a flat surface or a piece of wood. If you don’t have any of these at hand, you may use a piece of black cloth. You won’t be able to tell any of the ink colors you used to refill the carttidges on such a dark material.


If your ink cartridge is clogged, try unclogging it by reading the instructions in the post How to unclog my ink cartridges at home.

Step #1:
First, remove the label from the ink cartridge. As you may already know, these ink cartridges have a label on the very top, which indicates the cartridge’s ink color and number. Occasionally, people choose to remove this label and get rid of it, but we recommend you only take it off and keep it somewhere safe to place it back on the cartridge later.

This will avoid the ink from drying inside the cartridge and it will help elongate the life of the sponge inside it.

Step #2:
Fill each syringe with 5ml of ink. We recommend you only use this amount of ink. Also, we suggest you take out all the air that could be in the bottom of the syringe to avoid adding any of it to the ink cartridges. Please take a look at the following picture.

syringe to refill ink cartridges

Step #3:
Inject the exact amount of ink we mentioned earlier very slowly into the cartridge. The ink application process should always be done as slowly as possible to help the sponge inside the cartridge to absorb all the ink. Please refer to the proper color cominimage for the HP 93 tricolor ink cartridge.

where the colors are

Step #4:
Once the ink cartridge has filled up completely with all the ink you added to it, we recommend you place the label back on the cartridge exactly as it was in the beginning. This label, along with the drains on the cartridge, work together in order for the ink cartridge to take the necessary amount of ink to help the ink inside it drop.

If you need any help with this, don’t hesitate in contacting us by posting a comment in the section below this post. Now put the cartridge back in the printer and print several test sheets. To learn how to do this, please visit the post how to print a test sheet from Windows.

Notes:
Please let the cartridge rest for a while before putting it back in the printer. This will allow the cartridge to soak the sponge inside it with the ink. If you want, you could also shake the cartridge, print head facing downwards, to make the ink drop even more.

If you have any problems with this ink cartridge when you install it in your printer, such as blinking and other possible errors, please execute the next steps:

• Take the ink cartridge out and clean the contacts on it.
• Clean the contacts on the printer exactly where they come in touch with the ones on the cartridge.
• If this doesn’t solve the issue, then leave the cartridge outside of the printer and turn the printer off for two hours. You can put it back in the printer after this time has passed.
• If you still can’t reach a solution, just ask us, it’s very simple. Just post a comment in the ection below this post.

How to refill the HP 61 tricolor ink cartridge

If you purchase a brand new HP 61 tricolor ink cartridge, it will yield up to 220 pages. After refilling them though, you can get up to 150 pages from it. These cartridge use water-based or dyed ink, which you can regularly find in every printer store to refill canon, lexmark and HP cartridges.

These cartridges belong to a new HP cartridge generation, so you shouldn’t be surprised if you can’t print as many pages with them as you would expect to do. Usually, we recommend you add a bit more ink than normal when refilling these cartridges to get a considerable page yield. In this case, you recommend you inject 3ml of every ink color.

You must not confuse these cartridges with the HP 122 ones. Even when they’re compatible with the same printers, they are sold in different regions. To learn more about this situation, please visit the following post. However, this particular ink cartridge is compatible with the following HP printer models: HP deskjet 1050 all-in-one printer j410a; HP deskjet 1055 all-in-one printer j410e, HP deskjet 1000 printer j110a; HP deskjet 1051 all-in-one printer; HP deskjet 2050 all-in-one printer j510a; HP deskjet 3054 all-in-one printer j610a; HP deskjet 3000 printer j310a; HP deskjet 3050 all-in-one printer j610a; HP deskjet 3050a all-in-one printer j611g; HP deskjet 3052a e-all-in-one printer j611g, HP deskjet 3510e all-in-one printer; HP deskjet 2512 all-in-one printer, HP deskjet 2510 all-in-one printer, HP deskjet 2050 all-in-one printer j510e; and HP deskjet 3054Ae all-in-one printer j611j.

Refilling procedure for the HP 61 tricolor ink cartridge:

Before you start refilling any ink cartridge, we recommend you put it somewhere you can clean easily afterwards, whether it’s an actual flat surface or a piece of wood. If you don’t have any of these, you may use a piece of black cloth.
You won’t be able to notice the ink colors you’ve used to refill this cartridge on this piece of fabric.

Step #1:
Remove the label from the cartridge. As you may already know, these cartridges have a label on the very top, which indicated the cartridge color and number. Some people can remove and get rid of it, but we recommend you only take it off and keep it somewhere safe to put it back on the cartridge later. This will keep the ink from drying inside the cartridge, and it will help the sponge in it last longer.

Step #2:
Fill the three syringes with 3ml of ink each. We recommend you only use this amount of ink for this particular cartridge. Also, we suggest you remove the air insde the syringe to avoid adding any of it to the cartridges. Please take a look at the following image.

syringe for refilling cartridge

Step #3:
Now inject all the ink as slowly as possible into the cartridge. The application must always be slow in order to get the sponge inside the cartridge soaked with ink. Take a look at the next picture to learn the proper color combinations on the HP 61 tricolor ink cartridge.

place to put the colors

Step #4:

Once you’ve filled the cartridge completely with the amount of ink we mentioned earlier, we recommend you put the label back on it exactly as it was in the beginning. The label, along with the drains on the top of the cartridge, work together to get the necessary amount of air inside the cartridge so the ink drops.

If you need help wit this procedure, please contact us by leaving a comment in the section below this post. Now you may put the cartridge back in the printer and print several test sheets. To learn how to do this, please visit the following post.

Notes:

Please let the cartridge rest for a few minutes before placing it in the printer, which will help soak the sponge inside it with ink. You could also shake the cartridge, print head facing downwards, to get the ink to drop even more.

If the ink cartridge causes any problems when you put it back on the printer, such as blinking and other issues, please stick to the following steps:

1. Remove the ink cartridge and clean the contacts on it.

2. Clean the contacts on the printer as well, exactly where they come in touch with the ones on the cartridge.

3. If this doesn’t fix the problem, leave the cartridge out of the printer, and turn the printer off for about 2 hours. You may turn the printer on and place the cartridge back in it after this time has passed.

4. If you still can’t reach a solution, please contact us. It’s very easy: all you need to do is post a comment in the section below this post.

How to refill the HP 57 tricolor ink cartridge

The HP 57 tricolor ink cartridge has very high page yield and photographic print quality, and it works with water-based or dyed inks. If you need more information regarding this ink type, please read the following post.

With this ink cartridge, as many other HP ones, you will need to refill it as very slowly in order to do it properly, and to help fill the sponge inside the cartridge completely.

The HP 57 ink cartridge is compatible with the following printer models:

HP deskjet  portable 450cbi; HP deskjet 5550, 5551 and 5552; HP officejet 6110; HP photosmart 100, 130, 230, 7150, 7350 and 7550, and HP multifuntion psc 2105, 2108, 2110, 2115,and 2150 y 2210.
When it’s brand new, it yields up to 500 pages. If you refill it using the procedure described ahead, it can still print 380 pages, approximately.

Procedure to refill the HP 57 tricolor ink cartridge:

Before we begin refilling the cartridge, we recommend you do this on a flat, easy-to-clean surface. You could also use a piece of wood as support. If you don’t have any of these at hand, then you can just use a piece of black cloth. You won’t be able to notice the ink that may fall on it while refilling this cartridge.

Step #1:
First, remove the label from the ink cartridge. As you may already know, these cartridge have one label on the very top of them, which indicated the cartridge number and color. Some people choose to take it off and get rid of it, but we recommend you take it off and keep it somewhere safe to put it back on the cartridge later.

In this way, you can keep the ink from drying up faster that it should, and you will help the sponge inside the cartridge last longer.

Step #2:
Fill the three syringes with 5ml of ink each; we recommend you only add this much ink to it. We also suggest you remove all the air that may be inside the syringe, just to avoid injecting air into the cartridge along with the ink. Please take a look at the following picture.

syringe with ink

Step #3:
Now you may inject the amount of ink we mentioned earlier into the cartridge. Please remember to add the ink as slowly as possible to help the sponge inside the cartridge to absorb all the ink. Ifyou look at the following picture, you’ll be able to see where each color is found in the HP 57 tricolor ink cartridge.

place where you put the colors

Step #4:
Once you’ve filled  the ink cartridge completely, we recommend you put the label back on it exactly as it used to be. This label, as well as the canals on the top of the cartridge, make the perfect match to help the cartridge take as much air as it needs to make the ink drop.

If you need help with this procedure, please contact us by posting a comment in the section below this post.
Now place the cartridge back in the printer and have it print several test sheets with it.

Notes:
Let the ink cartridge rest for a few moments before making it print, This will allow the sponge inside the cartridge absorb all the ink. If you want, you could also shake  the cartridge a bit,m print head facing downwards, to make the ink drop even more.

If the ink cartridge has any problems when you install it, such as blinking, then please execute the following steps on your printer.

1. Take the ink cartridge out and clean the contacts on it.
2. Clean the contacts on the printer as well, exactly where they come in contact with the ones in the cartridge.
3. If this still doesn’t solve the problem, then leave the cartridge out of the printer for 2 hours and then put it back in it after the time has passed.
4. If none of these solutions work for you, just contact us by posting a comment in the section below this post.

How to refill HP 22 tricolor ink cartridges

This HP 22 Tricolor ink cartridge is one of the best products ever made by HP, due to its high yield and the material they’re made of. These cartridges have a higher resistance than most current ones; modern ink cartridges tend to be measured with the same criteria. You can read more about this on our post Why to avoid disposing of or replacing my old printer.

One of the most important factors to consider when naming a product one of the best ones of an entire brand, as we’re doing right now, is compatibility. This particular ink cartridge is compatible with countless printer models; the entire compatibility listing will appear further along this post.

You can also learn to refill the HP 21 Black ink cartridge, the one that accompanies this one. This one’s also a very high yield ink cartridge.

We also recommend you keep any printer that uses this ink cartridge until the very end. You can replace it once it’s incapable of printing again.

This ink cartridge yields up to 165 pages, an amount that can go down to 120 pages after it’s been refilled. This will stay this way as long as you follow this tutorial strictly.

Instructions to refill an HP 22 Tricolor ink cartridge:

Before starting the refill process, we recommend you clean the contacts on this ink cartridge. While this is necessary, it’s not really mandatory since these ink cartridges are known to have very high page yield. However, if you haven’t used them in a while, there may be some dried ink lying on the print heads. In this case, we recommend you read our post How to clean my print heads.

After this cleaning process has been done, again, a necessary but voluntary procedure, we’ll proceed to refilling our ink cartridges. Please remember to clean your cartridge’s print heads after they’ve been refilled three (3) times.

Step #1:
Place the cartridge on a surface that can take an ink spill or two. We recommend you stay away from white materials, since the ink will probably stay on them. This is why we suggest you use any black material, or even a flat surface where you can remove ink stains easily.

Step #2:
You can now remove the label located on the top of the ink cartridge; it will hold the ink cartridge’s number. We always recommend you remove the entire label before refilling your ink cartridge, since this label lets the necessary amount of ink enter the ink cartridge. This airflow aids your print quality and page yield, helping your printer reach the highest standards. Remove this label very slowly and keep it from harm.

Step #3:
Fill a syringe with 5ml of colored ink. Do not exceed this amount to avoid damaging your cartridge by surpassing the amount of ink it was made to hold. Adding more ink than necessary to an ink cartridge can jeopardize it.
Tak a look at color application in the following picture.

the color for 22 hp ink

Step #4:
Very carefully, place the labels back on the ink cartridges. Try and put these back as well as possible to allow a certain amount of air to enter the cartridge; this air will flow thorugh the canals inside the cartridge and make the ink drop.

Step #5:
Place the cartridge back in the printer and have the printer clean them. This will put them in the right stop. Take into account you’ll only reach ultimate print quality once you’ve printed about eight (8) pages using these ink cartridges. You could also print a color test sheet if you want to.

Even if you repeat this entire procedure just as we did it, things may not go according to plan. In that case, we have plenty of time to help you, and you must only post a comment in the section below this post to contact us. We’ll be glad to answer each one of your messages.

How to install continuous ink system to Canon PIXMA iP2702

The PIXMA IP2702 is the best in the market thanks to its high quality printing and affordable price. Also, this printer uses FINE 210 and 211 japanese made ink cartridges which are able to retain more ink and it makes the perfect printer to print with continuos ink system.
Thanks to the incorporation of continuos ink system in most printer's structures, the consumer can print more pages and waste less ink. Therefore, saving more money in the long run and helping the consumer to avoid buying a brand new ink cartridge.

This is not a multifunction printer, but for domestic use is perfect. The PIXMA IP2702 with a continuos ink system can print large quantities of paper without any problems. Moreover, since its a single function printer; it is less likely to present any technical anomalies that plagues most of printers with a continuos ink system. Finally, to put it in simple terms "the simple they are the less headaches we'll have".
A continuos ink system is an device made of several ink tank that can be adapted to a printer so it can print with out any ink cartridges. Before you decide to install a continuos ink system, we recommend to read continuos ink system components.
While continuos ink system allows us to print large quantity of paper, we recommend to read the manufacturer instructions and focus on the printer's ability to hold such system, after all Canon PIXMA IP2702 must obey like the rest of the other printers  the system manufacturer's laws.  

Continuos ink system ink's tanks

Continuos ink system installation procedures for Canon PIXMA IP2702:

We recommend using continuos ink system silicon hoses for better handling and maneuverability when the rail where the system is mounted inside the printer moves. Thus, allowing the ink to flow effortlessly though the hoses. 

Essential tools for installation

• We'll need a Canon PIXMA IP2702 (even better if you have a brand new one).
• We'll need 210 and 211 ink cartridges (If you have purchase the new version of Canon PIXMA IP2702 printer, chances are, the printer will come with updated ink cartridges. We recommend new ink cartridges in case the cartridges that came with the printer get damage. We recommend purchasing ink cartridges XL version since these ink cartridges have greater ink capacity for long last printing).
• We'll need a cartridge bleeder for Canon 210 and 211 cartridges. See image bellow.

cartridge bleeder

• We'll need a drill wick to make a small hole in the cartridge just as big as the connectors so the hoses can pass through. See image bellow.

Drill wick for piercing Canon cartridges

Now we show you which are the hoses connectors for Canon ink cartridges. We recommend you to take these hose connectors to the hardware store so you may find the right connectors when you are ready to purchase them. Also, at the hardware store you will be able to find the appropriate drill wick for the connectors so you will have no problem installing the system and avoiding any air leakage.  

Hose connectors

• We'll need a four color continuous ink system for Canon printers. Usually, these systems bring their own installation accessories as shown in the image above. However, we've detailed some of the items that sometimes do not come with some of the systems.
• We'll need base water ink or dye. But, if you have a pigmented ink, it's ok to use as well. We recommend to read our post on the difference between dye and pigmented ink , these systems provide four ounces of ink to the ink tanks. 

We recommend to carefully read this post to avoid any confusion when you are implementing these steps. If you have any doubts, please write them in the provided comment area.

Continuos ink system installation procedures for Canon printer:

The following steps must be perform correctly so we may obtain the desire results. Moreover, we recommend to perform the procedure in safe place where you do not have to worry about ink spill. If you wish you place a piece of cloth or paper towel where the installation is going to take place.  Also, use latex gloves to avoid any ink stain on your hands. 

Step 1.

Before installing a continuos ink system, we must make sure that the ink cartridges are not clog. This type of check up is usually perform on cartridges that come with a brand new printer. However, if the printer is used, then we need to check if the cartridges are properly working with the print heads and printing with optimal quality. Therefore, we recommend to print a test page to see how well the second hand printer prints. Please refer to the printer owner manual regarding continuos ink system. 

Connectors and print head

When we talk about plastic packaging Canon 210 and 211 cartridges, we mean what show below, as stated above it is advisable to do the cartridges perforations within these packages to avoid contact with the connectors and nozzle.

Plastic packaging where Canon cartridge come

Step # 4

This step consists of doing perforations to ink cartridge for installation of hoses. For this you must have the drill bit that we mentioned above. Now I will show you a picture of the right place where you have to do the perforations. Verify that the drilling waste are not left inside the cartridge, please drill carefully and check that the drill bit is always straight. In this step we have to know that drilling must be slightly smaller than the hose connectors, that will avoid the airflow at that point of the installation.

"Important note: for drilling the cartridge, we recommend plugging the hole that brings the cartridge to the top and make the hole a little below and to the left, when we talk of a little distance we are talking about the size of a continuous ink system hose, this will prevent the tricolor ink cartridge not recognized in the future because the printer head has a piece that will not allow the connectors come completely to the printer. "

Here is a picture of how the correct perforation should be

The right perforation of the Canon 211 cartridge

Step # 5

After having already drilled our cartridges perform the installation of the hose connectors as discussed above, these must be firmly attached and without exhaust air when put our elbows on the hose connectors these work perfectly. see image.

Step # 6

After having the two ink cartridges hose connectors installed, we proceed to fill ink tanks, for that we will need about 4 ounces of dye ink.

Step # 7

Place each color of ink in its respective hole, for that we must put both cartridges outside our printer almost at the same distance they will be inside the printer, because all hoses will not have the same size, and make the cuts the exact measure for each color. see image below.

Distance of the hose

Step # 8

Install elbows to the continuous ink system, the elbows are as the name says, small elbows to help the ink system fits the design of the printer and bounce into the process of the printer.

Step # 9

We connect the corresponding colors for each color in the ink cartridge, if necessary can test the distances of the  hose cuts.

Step # 10

We have already installed the cartridges in the ink system, the need now is to make the ink  get to the cartridges. To do that we use the ink bleeder, this tool is a very good utility because it is used to take ink out of the cartridges, and in this case we are going to use it to make the ink in the tanks get to the cartridges and fill the hoses of ink. When we see that the ink filled the cartridge, we stop to avoid exceeding the limits and to avoid ink spills inside our printer.

After the ink cartridge reaches the hoses you will them like the picture below. The ink is already in the cartridge.

How hoses look when the cartidge is full of ink

Another way to get the ink inside the cartridges is through an empty syringe. Remove the needle from the syringe and introduce air to the system, the air will cause the ink reaches the tip of the ink system. To do this the hoses can not be connected to the cartridge, we put air quickly when the ink is arriving introduce hose elbow to the ink cartridge. If you want to use this method you have to do the same for each color. See image.

Step # 12

You have to clean any ink residue that appears in the printer to prevent scattering of toner pages, be careful passing through the area where the pages go though. If during the bleeding of the cartridge it has spill ink you must remove it, use napkins and be aware of not to leave any residue on the napkin either.

After all the above procedure, we an installation like the picture that appears below, we must avoid the hoses rub to prevent the printer carriage to jam because in the future this could cause an error in our printer. See emage.

Step # 13

Now the last thing we do is print a test page with our printer and the ink system installed, look for the sensor the lid that gives access to the cartridge, let it open so that you can see if there is any obstruction while printing. After seeing that there is no obstruction what you do is to place the hose in place and start printing. If you have any  problem or questions about this post makes a comment in this post and we will gladly help you.

How to refill Canon 211 and 211XL cartridges

These are very good ink cartridges especially for their performance and easy functionality. These cartridges are the most used for printers with continuos ink system which have become famous for their easy installations in Canon printers. Therefore, making these cartridges very attractive for Canon printers ' owners. These cartridges are the best of the best due to their high quality and well built structure. But, they are also expensive which force most of Canon's printer users to refill these cartridges to save money in the long run.

Instructions on how to refill Canon 211 and 211XL Cartridges:  

1. Place the cartridge on a black piece of cloth or a napkin in case the cartridge drains ink.
2. Next, remove the label from the cartridge surface to reveal three holes. Drill one of the holes big enough to insert the syringe fill with ink (first image). 
3. You will see three holes on the cartridge. Inject 5ml of ink in each hole. Make sure to inject the ink in the corresponding order otherwise, the cartridge could get damage (second image). 
4. Refill the cartridge SLOWLY to avoid any spill ink. Place the label back on the cartridge to seal the holes. We recommend to return the cartridge to the printer and leave it for about 8 hours to allow the ink to saturate the sponges. 

Ink insertion point

Corresponding color holes

Related articles:

• How to refill Canon 210 and 210 XL
• How to refill Canon 210 and 211

How to reset the 122 HP® cartridges

I hope to solve your problem without giving you the solution "But it is the reality"

Unfortunately this case cannot be solved because these cartridges are not very strong, it is an ongoing problem which occurs when this cartridge is refilled.

ink cartridge hp black and tricolor

We always recommend refilling these cartridges using the following procedure.

• How to refill ink hp 122 black cartridges
• How to refill hp 122 tricolor ink cartridges  

So much so that the creators of these cartridges Hewlett-Packard have discontinued the cartridge 122 without completing the continuation of their printers.

You may be interested in the following links:

• The real secret of the HP 122 cartridges

How to know when my Canon® cartridges are blocked

► If you try to print something and the printer acts as if it’s printing, but it’s really not.
► If when the page should print, it prints out a blank page.
► If the cartridges only prints a part of the letter and in the middle there is a blank line.
► If the pages come out blurry.
► If your cartridge only leaves a drop of ink on the sheet and nothing else.
► If only the first part of the page prints out but rest doesn’t.

All these factors indicate that your cartridges are blocked, be aware that this can cause serious problems in the circuit of the cartridges, so it is advisable to take action to fix this problem immediately.

Luckily in our blog that you are reading, we now have a way to solve this problem simply go to this link publish solves the problem.

Please follow the instructions closely for a good result

How to refill the cartridges for Canon MP280 printers

The only thing that is recommended is to remove the label from the top of the cartridge, take notice of the holes that these cartridges have.

Make the holes with the same iringuilla to make the exit and entry easy for the tip of the needle into the cartridge. Note! You cannot make the holes any bigger than they as the ink drip’s gravity will not be the same and the cartridges will be damaged.

What comes next is to put the ink in which has to be a small quantity. We recommend doing it in a place where there is something below where the extra ink from the cartridge can fall. It is not recommended to put in more than 5 ML in the black cartridges and less than 3 ML in tricolor cartridges.

Having completed this process, you will next have to put in the cartridges and print, if the printer does not recognize the cartridge, proceed to reset the 211 Canon and 210 Canon cartridge, it is a very easy process you just have to click the link I’ve left below about resetting Canon cartridges.

Otherwise if they are damaged there’s no other option but to buy new affordable cartridges. If you are in the Dominican Republic I have left the link below for affordable cartridges.

Links directly related to this post :

• Refilling Canon PG-210 cartridges
• Refilling Canon CL-211 cartridges

How to reset a Canon iP2700 printer

Greetings dear readers with this post we will now see how to reset the cartridges iP2700 printer, such printer:

This process is simple because these are inkjet printers, of course! Very good printers! As they print perfect quality images, the cartridges are of low heat and the pictures are better reflected on the pages.

It could happen that when you refill, a screen shows up on your computer saying that the ink cartridge is empty, of course this is actually true according to a page counter that is installed on your computer when you install the software from the original cd from the printer’s box.
This usually happens when we refill the cartridges for Canon so we can know how to refill the Canon 210 and 211 tricolor ink cartridges.

A short review of what the page counter is, for example as we know all cartridges in packaging say about how many pages of use they render, and when the printer detects a new cartridge and begins counting and deprograms to know how many pages have been printed with this cartridge, the count will appear, and if that quantity of pages is finished it will say that the system simply cannot print anymore.

So then comes the process that we will now explain which preferably would be used for system errors of the printer which is very little the part of the card but this option would be for that, the fact is that if we can use it to save, why not. What we have to do is what the tutorial says to solve the following problem:

canon printer ip2700

To fix it what you need to do is simple, hold the  STOP / RESET down ( it has a red triangle in a circle) on the printer for 10 seconds , and with that ink level is cleared and you can print all you want.

This tutorial is simple, if it’s possible you can even approach the printer after 10 seconds to hear a small noise which indicates that the reset process is started.

How to reset printer program

Download the software using this link:

click aquí

1. The printer must be connected and turned on (Beforehand you must reset manually ).
2. Select the USB port ( USB PORT) where the printer is connected.
3. Select CLEANING and EEPROM CLEAR.
4. Click the button TEST PATTERN 1.
5. Click on MAIN ( Clear wate ink counter ). From there you just have to wait a minute or two and you will be ready.

Turn off the printer and disconnect the USB cable, to close the General tool. In "Printers and Faxes”, set the printer to "copy 1" as default. In case none of the above ways work correctly, we recommend cleaning the cartridges please visit our post on how to clean my cartridges.