lunes, 2 de junio de 2014

How to refill an HP 75 tricolor ink cartridge

The inkjet cartridges hp 75 tricolor ink cartridges are based dyes or dye, normally these cartridges usually have a good performance but in case you can get to see when left damaged cartridges are emptied by complete and not filled immediately.

It is recommended that the cartridges do not damage the circuits immediately fill them before they completely run out, despite the ink used to print serve to cool slightly cartridges, if we let if these exhaust connectors are completely burned causing damage to the cartridge immediately. This and any cartridge through these cases it is recommended to read our tips on caring post circuits cartridges.

The HP 75 tricolor ink cartridges can hold about 5ml of ink per color, and we will show you how to refill them step by step.

However, you must first know these cartridges are compatible with the following printer models:

HP deskjet d4260 printer and d4360 printer, HP officejet J5780 all-in-one, HP officejet j5740 all-in-one printer; HP officejet j5750 all-in-one printer; HP officejet J6450 all-in-one printer; HP officejet j6480 all-in-one printer; HP photosmart c5250 all-in-one printer; HP photosmart c4210 all-in-one printer; HP photosmart c4250 all-in-one printer; HP photosmart c4240 all-in-one printer; HP photosmart c4280 all-in-one; HP photosmart c4385 all-in-one printer; HP photosmart c4345 all-in-one printer; HP photosmart c4450 all-in-one printer; HP photosmart c4440 all-in-one printer; HP photosmart c4435 all-in-one printer; HP photosmart c4480 all-in-one printer; HP photosmart c4599 all-in-one printer; HP photosmart c4580 all-in-one printer; HP photosmart C4550 all-in-one printer, HP photosmart C5240 all-in-one printer; HP photosmart c5280 all-in-one printer; HP photosmart d5360 printer; HP photosmart d5345 printer; HP photosmart c5580 all-in-one printer; HP photosmart c5540 all-in-one printer; and HP photosmart c5550 all-in-one printer. Now we will show you the proper color combination for refilling the HP 75 tricolor ink cartridge.

If your ink cartridge isn’t refilled properly or causes some problems, please contact us by leaving a comment in the section below this post.

Procedure to refill the HP 75 tricolor ink cartridge:

Before you start refilling any ink cartridge, we recommend you use a surface you can clean easily, whether it’s a flat surface or a piece of wood. If you don’t have any of those, you can use a piece of black cloth. This fabric won’t show any of the ink colors you used to refill the cartridges.

In case your ink cartridge is clogged, try unclogging it by following the instructions in the following post.

Step #1:
First, take the label off the cartridge. As you may already know, these cartridges have a label on the top side, which indicates the cartridge number and color.

Occasionally, people choose to get rid of this label, but we recommend you take it off and and keep it in a safe place to place it back on the cartridge later. This will keep the ink from drying inside the cartridge and elongate the durability of the sponge in it.

Step #2:
Fill the three syringes with 5ml of ink each. We recommend you only use this quantity on this particular cartridge. Also, we always recommend you remove all the air inside the syringes to avoid injecting it into the cartridges themselves. Please take a look at the following image.
syringe for refilling cartridges
syringe for refilling cartridges
Step #3:
Inject all the ink very slowly into the cartridge. Remember to always apply the ink as slowly as possible to help the inner sponge absorb all the ink you’re adding to it. The next picture will show you the proper color combinations on your HP tricolor ink cartridge.
place to put the colors
place to put the colors
Step #4:
Once you’ve filled the ink cartridge completely with the amount of ink we mentioned earlier, we recommend you place the label back on the cartridge exactly as it was in the beginning.

This label, along with the drains located on the top of the cartridge, work together in order to let the necessary amount of air enter the cartridge and make the ink drop.

If you need help, don’t hesitate in contacting us by posting a comment in the section below this post. Finally, place the ink cartridge back in the printer and print several test sheets with it. If you wish to learn how to do this, please visit the following post.

Notes:
Let the ink cartridge rest for a few minutes before putting it back in the printer. This will allow the sponge inside the cartridge to ask up all the ink. If you want, you can also shake the cartridge, print head facing downwards, to make the ink drop even more.

In case you have any problems with the ink cartridge, such as blinking and other minor issues, please execute the following steps:

1. Remove the ink cartridge and clean the contacts on it.
2. Clean the contacts on the printer as well, exactly where they come in touch with the ones on the cartridge.
3. If this doesn’t solve the issue, leave the cartridge out of the printer and keep the printer turned off for 2 hours. You may place the cartridge back in the printer after this time has passed.
4. If you still can’t reach a solution, just ask us by posting a comment in the section below this post.

How to refill the HP 74 black ink cartridge

The HP 74 black ink cartridges are known for their high page yield and solid performance. They can’t be damaged easily and can print up to 200 pages, even after been refilled. If you refill them with pigmented ink, you could get even more pages out of it, since this is the kind of ink this cartridge was manufactured with. If you wish to learn more about ink types, please visit the following post.

If you choose to use this cartridge extensively, we recommend you set it in saving mode and have it print in quick drafts only. To learn how to do to this, please read the next post.

This ink cartridge is compatible with the following printer models:

HP deskjet D4260; HP deskjet d4360; HP officejet j5780 all-in-one printer; HP officejet j5740 all-in-one printer; HP officejet j5750 all-in-one printer; HP officejet j6450 all-in-one printer; HP officejet J6480 all-in-one printer; HP photosmart c5250 all-in-one printer; HP photosmart c4210 all-in-one printer; HP photosmart c4250 all-in-one printer; HP photosmart c4240 all-in-one printer; HP photosmart c4280 all-in-one; HP photosmart c4385 all-in-one printer; HP photosmart c4345 all-in-one printer; HP photosmart c4450 all-in-one printer; HP photosmart C4440 all-in-one printer; HP photosmart c4435 all-in-one printer; HP photosmart c4480 all-in-one printer; HP photosmart c4599 all-in-one printer; HP photosmart c4580 all-in-one printer; HP photosmart c4550 all-in-one printer; HP photosmart c5240 all-in-one printer; HP photosmart c5280 all-in-one printer; HP photosmart c5360 printer; HP photosmart D5345 printer; HP photosmart c5580 all-in-one printer; HP photosmart c5540 all-in-one printer; and HP photosmart c5550 all-in-one printer. If this refill procedure doesn’t work for you, please contact us by posting a comment in the section below this post, and we will gladly help you out.

Instructions to refill the HP 74 black ink cartridge:

Before we start, we recommend you clean the contacts on your printer. Even if this is necessary, ,it is not mandatory, since these cartridges have such good performance. However, if you haven’t used them for a while, there could be some dried ink on the print heads, which is never good. To learn how to clean them, please read the next post.

After you’ve finished with this cleaning procedure which, again, is not mandatory and can choose to do  it or not, you may proceed with the refilling procedure. We recommend you clean the print heads after refilling your cartridges three times in a row.

Step #1:
First, put the cartridge somewhere you can easily clean an ink spill from. We don’t recommend you use any white materials, since you won’t be able to remove the ink from them. On the contrary, we suggest you use a black material or cloth, even a flat surface that you can clean ink from.

Step #2:
Now you may proceed to removing the label located on the top of the cartridge. We recommend you always remove the label before refilling it, because it allows the necessary amount of air into the cartridge.

The air helps the prints to reach maximum quality, and the cartridge to reach the performance it was made for. Remove this label carefully to avoid damaging it.
place where you should fill
place where you should fill
You may several orifices in the cartridge to help spread the ink inside it.

Step #3:
Add 17ml of ink as slowly as possible to the cartridge. We need you to do this slowly to help the ink spread inside the cartridge, and to soak up the sponge in it.

Step #4:
Once you’ve filled the cartridge with ink, all you’ll need to do is print a test sheet with  it. We recommend you leave the cartridge inside the printer from now on.

Even if you’ve followed this entire procedure strictly, something could still go wrong. If this happens to you, please contact us by leaving a comment in the section below this post, and we will help you out immediately.

Like we said before, we always recommend you print a test sheets after refilling an ink cartridge. To learn how to do this, please visit the following post.

If your ink cartridge has any problems after being refilled, such as blinking, please try solving them with the following steps:

1. Remove the ink cartridge and clean the contacts on it with a wet napkin.
2. You should also clean the contacts on the printer in the same way.
3. If this doesn’t solve the problem., turn your printer off for 10 minutes and disconnect the power cord. You may plug the cable back in the printer and place the cartridge in it after this time has has passed.
4. If you still can’t reach a solution, then please contact us.

How to refill the HP 61 tricolor ink cartridge

If you purchase a brand new HP 61 tricolor ink cartridge, it will yield up to 220 pages. After refilling them though, you can get up to 150 pages from it. These cartridge use water-based or dyed ink, which you can regularly find in every printer store to refill canon, lexmark and HP cartridges.

These cartridges belong to a new HP cartridge generation, so you shouldn’t be surprised if you can’t print as many pages with them as you would expect to do. Usually, we recommend you add a bit more ink than normal when refilling these cartridges to get a considerable page yield. In this case, you recommend you inject 3ml of every ink color.

You must not confuse these cartridges with the HP 122 ones. Even when they’re compatible with the same printers, they are sold in different regions. To learn more about this situation, please visit the following post. However, this particular ink cartridge is compatible with the following HP printer models: HP deskjet 1050 all-in-one printer j410a; HP deskjet 1055 all-in-one printer j410e, HP deskjet 1000 printer j110a; HP deskjet 1051 all-in-one printer; HP deskjet 2050 all-in-one printer j510a; HP deskjet 3054 all-in-one printer j610a; HP deskjet 3000 printer j310a; HP deskjet 3050 all-in-one printer j610a; HP deskjet 3050a all-in-one printer j611g; HP deskjet 3052a e-all-in-one printer j611g, HP deskjet 3510e all-in-one printer; HP deskjet 2512 all-in-one printer, HP deskjet 2510 all-in-one printer, HP deskjet 2050 all-in-one printer j510e; and HP deskjet 3054Ae all-in-one printer j611j.

Refilling procedure for the HP 61 tricolor ink cartridge:

Before you start refilling any ink cartridge, we recommend you put it somewhere you can clean easily afterwards, whether it’s an actual flat surface or a piece of wood. If you don’t have any of these, you may use a piece of black cloth.
You won’t be able to notice the ink colors you’ve used to refill this cartridge on this piece of fabric.

Step #1:
Remove the label from the cartridge. As you may already know, these cartridges have a label on the very top, which indicated the cartridge color and number. Some people can remove and get rid of it, but we recommend you only take it off and keep it somewhere safe to put it back on the cartridge later. This will keep the ink from drying inside the cartridge, and it will help the sponge in it last longer.

Step #2:
Fill the three syringes with 3ml of ink each. We recommend you only use this amount of ink for this particular cartridge. Also, we suggest you remove the air insde the syringe to avoid adding any of it to the cartridges. Please take a look at the following image.
syringe for refilling cartridge
syringe for refilling cartridge
Step #3:
Now inject all the ink as slowly as possible into the cartridge. The application must always be slow in order to get the sponge inside the cartridge soaked with ink. Take a look at the next picture to learn the proper color combinations on the HP 61 tricolor ink cartridge.
place to put the colors
place to put the colors
Step #4:
Once you’ve filled the cartridge completely with the amount of ink we mentioned earlier, we recommend you put the label back on it exactly as it was in the beginning. The label, along with the drains on the top of the cartridge, work together to get the necessary amount of air inside the cartridge so the ink drops.

If you need help wit this procedure, please contact us by leaving a comment in the section below this post. Now you may put the cartridge back in the printer and print several test sheets. To learn how to do this, please visit the following post.

Notes:
Please let the cartridge rest for a few minutes before placing it in the printer, which will help soak the sponge inside it with ink. You could also shake the cartridge, print head facing downwards, to get the ink to drop even more.

If the ink cartridge causes any problems when you put it back on the printer, such as blinking and other issues, please stick to the following steps:

1. Remove the ink cartridge and clean the contacts on it.
2. Clean the contacts on the printer as well, exactly where they come in touch with the ones on the cartridge.
3. If this doesn’t fix the problem, leave the cartridge out of the printer, and turn the printer off for about 2 hours. You may turn the printer on and place the cartridge back in it after this time has passed.
4. If you still can’t reach a solution, please contact us. It’s very easy: all you need to do is post a comment in the section below this post.

How to refill the HP 61 black ink cartridge

The HP 61 black ink cartridge works with pigmented inks, which is why it can yield up to 190 pages of laser print quality. If you refill this cartridge with more pigmented ink, it will still yield up to 120 pages. TO learn more about pigmented ink, please visit the following post.

You could say a new generation of HP ink cartridges started when this cartridge was released, since these new ones print fewer pages than the older models. This is why we shouldn’t be surprised when our new cartridges print less pages than a traditional one.

This cartridge is compatible with the following printer models: HP deskjet 1050 all-in-one printer j410a; HP deskjet 1055 all-in-one printer j410e, HP deskjet 1000 printer j110a, HP deskjet 1051 all-in-one printer, HP deskjet 2050 all-in-one printer J510a, HP deskjet 3054 all-in-one printer J610a, HP deskjet 3000 printer J310a, HP deskjet 3050 all-in-one printer - j610a, HP deskjet 3050A all-in-one printer - j611g, HP deskjet 3052a all-in-one printer j611g, HP deskjet 3510 all-in-one printer, HP deskjet 2512 all-in-one printer; HP deskjet 2510 all-in-one printer, HP deskjet 2050 all-in-one printer j510e and HP deskjet 3054a all-in-one printer j611j. To refill this cartridge, we recommend you only use 5ml of ink. This surpasses the regular amount of ink the cartridge holds, but it will not cause any problems.

Instructions for refilling the HP 61 black ink cartridge:

Before we start, we recommend you clean the contacts on this cartridge. Keep in mind this is only necessary, not mandatory, since these cartridge have very good outcome. However, if you haven’t used the cartridge in a long time, there could be some dried ink on the print heads, which is never good. If you wish to learn how to do this, please visit the following post.

Step #1:
First, place the cartridge on a surface that can take an ink spill or two. We don’t recommend you use any white materials, since you won’t be able to remove the ink from it, but a dark or black material itself, even a flat surface you can easily remove all the ink from.

Step #2:
Now you may proceed to removing the label on top the cartridge, which contains the cartridge number. We always recommend you remove this label before refilling the cartridge, since it’s in charge of letting the necessary amount of air into the cartridge. This will allow it to reach its maximum printing quality and the page yield it was made for. Take the label off slowly in order to avoid damaging it.
where the ink will
where the ink will
Step #3:
You must now inject the 5ml of ink very slowly. We need you to do this as slowly as possible to help the ink spread inside the cartridge in the best way possible, and to soak the sponge in it with ink. Please take a look at the following image, and remember to take all the air out of the syringe.

Step #4:
Now that you’ve refilled the ink cartridge, all you need to do is print a test sheet with it. We recommend you leave the cartridge inside the printer from now on.
Even if you’ve followed these instructions strictly, something could still go wrong. If this is your case, then please contact us by leaving a comment in the section below this post, and we will help you out immediately.
Like we mentioned earlier, we always recommend you print a test sheet after refilling an ink cartridge. To learn how to do this, please read the following post.

If you have any problems after refilling the ink cartridge, such as it blinking, please repeat the following steps:

1. Remove the ink cartridge and clean the contacts on it with a damp napkin.
2. You should also clean the contacts on the printer.
3. If this doesn’t solve it, then turn the printer off from 10 minutes and disconnect the power cord. Then plug the power cable back to it and place the cartridge inside.
4. If the last step doesn’t solve the issue, please contact us.

How to refill the HP 60 tricolor ink cartridge

These cartridges, which work with water-based or dyed inks, have a high page yield and overall functioning, and can print up to 165 pages. These belong to the latest generation of HP ink cartridges.

This particular cartridge has a lower page yield than usual, but still maintains HP printing quality. You should be able to print about 100 pages after refilling them with 3ml of ink, which you can learn how to do by following the instructions ahead.

 The HP 60 tricolor ink cartridge is compatible with the following HP printer models: HP deskjet D1660, D2530, D2545, D2560, D2660, D2680, D5545 and D556. Before you refill this cartridge, remember it was made for domestic use, and shouldn’t be used for any business related tasks.

Refill procedure for the HP 60 tricolor ink cartridge:

Before you refill an ink cartridge, we recommend you do this procedure on a surface you can clean easily, whether it’s a flat surface itself or a piece of wood. In case you can’t find any of these, you can use a piece of black cloth. The color of the fabric will cover all the ink colors you’ve used to refill the cartridges.

Step #1:
First, remove the label from the cartridge. As you may already know, these cartridges have a label on the top that indicated the cartridge number and ink color.

Occasionally, people choose to remove it and get rid of it, but we recommend you only take it off and keep it in a safe place to put it back on the cartridge. In this way, you will keep the ink inside the cartridge from drying, and help the sponge in it to last longer.

Step #2:
Fill the three syringes with 3ml of ink each. We recommend you use this exact amount for this particular cartridge. Also, we suggest you get rid of all the air inside the syringe before refilling them, in order to avoid adding air to the cartridge. Please take a look at the following image.
syringe with ink
syringe with ink
Step #3:
Then, inject the amount of ink we mentioned earlier as slowly as possible. You must always do this slowly so the sponge inside the cartridge may absorb all the ink you’re adding to it. Please look at the picture ahead to learn the proper ink color combinantion on the HP 60 tricolor ink cartridge.
where the colors are
where the colors are
Step #4:
Once you’ve filled the cartridge with the amount of ink we mentioned in this tutorial, we recommend you place the label back on the cartridge exactly as it was in the beginning. This label, along with the ditches on the top of the cartridge, work together so it gets all the air it needs to make the ink drop.

If you need help, don’t hesitate in contacting us by leaving a comment in the section below this post. Now put the cartridge back in the printer and print several test sheets.

Notes:
Please let the cartridge rest for a while before placing it back in the printer. This will allow the cartridge to fill the sponge with ink. If you want, you may also shake the cartridge, with the print head facing downwards, to make the ink drop even more.

If the cartridge causes any problems after being installed in the printer, such as blinking, please follow these next steps:

1. Remove the ink cartridge and clean the contacts on it.
2. Clean the contacts on the printer, exactly where they come in touch with the ones on the cartridge.
3. If this doesn’t fix the problem, leave the cartridge outside the printer and turn it off for about 2 hours. You can turn the printer on and install the cartridge back in it after this time has passed.
4. If you still can’t reach a solution, please contact us. It’s very easy: you only have to post a comment in the section below this post.

viernes, 30 de mayo de 2014

How to refill the HP 60 black ink cartridge

The HP 60 black cartridge works with pigmented inks, which is why it yields up to 220 pages with laser printing quality. Even after refilling it, this cartridge will still print up to 150 pages, but only if you use pigmented ink when doing it. To learn more about this type of ink, please visit the following post.

We could even state that a new generation of HP cartridges began after this one came out, since the new ones print fewer pages than the older HP cartridge models.

This is why we shouldn’t be surprised by the fact that our ink cartridges print fewer pages than the traditional ones, the HP 60 black cartridge is compatible with the following printer models:

HP deskjet D1660, D2530, D2545, D2560, D2660, D2680, D5545 and D5560. when refilling this cartridge, we recommend you only inject 5ml of ink into it. This amount surpases the original factory amount, but it won’t cause any problems.

Instructions for refilling the HP 60 black ink cartridge:

Before we start, we recommend you clean the contacts on this cartridge. While this is necessary, it’s not really mandatory since these cartridges have very high performance as it is.

However, if you haven’t used them, in a long time, there may be some dried ink on the print heads, and that’s never good. Please read the following post to learn how to clean the print heads on your ink cartridges.

After you’ve done the cleaning process which, again, is not mandatory and you can choose to avoid it completely, you can continue with the refilling procedure.

Step #1:
First, put the cartridge on top of any material that can take an ink spill or two. We don’t recommend you use any white fabric since you won’t be able to remove the ink from it, but you could use any black material, even a flat surface that you can clean ink from.

Step #2:
The, remove the label that carries the cartridge number, located at the very top of it. We recommend you always remove this label before refilling the cartridge.

This label is responsible for letting the necessary amount of air into the cartridge that will help it reach the highest performance and printing quality. Take this label off very slowly to avoid harming it.
place where you must fill 60 hp
place where you must fill 60 hp
Step #3:
Now inject the 5ml of ink as slowly as possible. We need you to add the ink very slowly to help spread the ink inside the cartridge, so it soaks the sponge that’s in it. Please take a look at the following image, and remember to take all the air out from the syringe.
syringe with ink
syringe with ink
Step #4:
Now that you’ve refilled the ink cartridge, all you need to do now is print a test sheet with it. We recommend you leave the cartridge inside the printer from now on.

Unfortunately, something could still go wrong with this procedure even if you’ve followed it strictly. If this is your case, please contact us by posting a comment in the section below this post.

We always recommend you print a test sheet after refilling the cartridge, so please visit the following post if you wish to learn how to do it.

If your ink cartridge starts blinking when you install it back in the printer, we recommend you read the following post to learn how to restore them. This same post will work on this cartridge and many others.

If your ink cartridge continues to have problems or blinking after it’s been refilled, please execute the following steps:

1. Take the ink cartridge out of the printer and clean the contacts on it with a wet napkin.
2. Clean the contacts on the printer as well.
3. If you still haven’t solved the problem, then turn your printer off for 10 minutes and disconnect the power cable. Wait until the 10 minutes have passed and then plug the cable back in the printer before installing the cartridge back in the printer.
4. If this doesn’t help, please contact us.

How to refill the HP 57 tricolor ink cartridge

The HP 57 tricolor ink cartridge has very high page yield and photographic print quality, and it works with water-based or dyed inks. If you need more information regarding this ink type, please read the following post.

With this ink cartridge, as many other HP ones, you will need to refill it as very slowly in order to do it properly, and to help fill the sponge inside the cartridge completely.

The HP 57 ink cartridge is compatible with the following printer models:

HP deskjet  portable 450cbi; HP deskjet 5550, 5551 and 5552; HP officejet 6110; HP photosmart 100, 130, 230, 7150, 7350 and 7550, and HP multifuntion psc 2105, 2108, 2110, 2115,and 2150 y 2210.
When it’s brand new, it yields up to 500 pages. If you refill it using the procedure described ahead, it can still print 380 pages, approximately.

Procedure to refill the HP 57 tricolor ink cartridge:

Before we begin refilling the cartridge, we recommend you do this on a flat, easy-to-clean surface. You could also use a piece of wood as support. If you don’t have any of these at hand, then you can just use a piece of black cloth. You won’t be able to notice the ink that may fall on it while refilling this cartridge.

Step #1:
First, remove the label from the ink cartridge. As you may already know, these cartridge have one label on the very top of them, which indicated the cartridge number and color. Some people choose to take it off and get rid of it, but we recommend you take it off and keep it somewhere safe to put it back on the cartridge later.

In this way, you can keep the ink from drying up faster that it should, and you will help the sponge inside the cartridge last longer.

Step #2:
Fill the three syringes with 5ml of ink each; we recommend you only add this much ink to it. We also suggest you remove all the air that may be inside the syringe, just to avoid injecting air into the cartridge along with the ink. Please take a look at the following picture.
syringe with ink
syringe with ink
Step #3:
Now you may inject the amount of ink we mentioned earlier into the cartridge. Please remember to add the ink as slowly as possible to help the sponge inside the cartridge to absorb all the ink. Ifyou look at the following picture, you’ll be able to see where each color is found in the HP 57 tricolor ink cartridge.
place where you put the colors
place where you put the colors
Step #4:
Once you’ve filled  the ink cartridge completely, we recommend you put the label back on it exactly as it used to be. This label, as well as the canals on the top of the cartridge, make the perfect match to help the cartridge take as much air as it needs to make the ink drop.

If you need help with this procedure, please contact us by posting a comment in the section below this post.
Now place the cartridge back in the printer and have it print several test sheets with it.

Notes:
Let the ink cartridge rest for a few moments before making it print, This will allow the sponge inside the cartridge absorb all the ink. If you want, you could also shake  the cartridge a bit,m print head facing downwards, to make the ink drop even more.

If the ink cartridge has any problems when you install it, such as blinking, then please execute the following steps on your printer.

1. Take the ink cartridge out and clean the contacts on it.
2. Clean the contacts on the printer as well, exactly where they come in contact with the ones in the cartridge.
3. If this still doesn’t solve the problem, then leave the cartridge out of the printer for 2 hours and then put it back in it after the time has passed.
4. If none of these solutions work for you, just contact us by posting a comment in the section below this post.